After so much success with my pillow auction to support the Red Cross after the devastating fires in Fort McMurray, I decided I wanted to do another in support of a local charity. I finished one pillow, then started in on three more tops.
I saw a neat block while scrolling through Instagram that inspired two pillows. It's based on a pattern that's part of a BOM hosted by the Portland Modern Quilt Guild.
I love how these dark prints look for the background. It really makes the colours shine.
And this dark grey background is good too, especially for the very colourful fabrics I picked for the star. How awesome is that psychedelic kitty fabric by Tula?
Oh boy was I happy with how these two pillow tops turned out, especially on the heels of the great disappointment from another. Cue what I am calling "imperfectly perfect" ...
When I came up with the idea for rainbow of Alison Glass fabric in half-rectangle triangles, I was so excited. It took forever to cut out all the fabric (after figuring out the math with some muslin prototypes), sew and then trim the HRT. But as soon as I started sewing them together, I realized HRT were not as straight-forward as HST. Points on one side were cut off, and the points on the top were floating. I was crushed. All that time, all that precious fabric wasted! I thought I can't auction this technically imperfect quilt, and I didn't even want to share it. My perfectionist side was aghast.
But then I let it sit for a couple days, mostly to ignore the disaster. Yes, I could "fix" the problem by trimming a bit off the ends of each block. Instead, I decided to embrace the imperfection. While it is technically wrong, it doesn't really take away from the overall effect of the pillow. It's still a lovely rainbow in gorgeous fabric. And I will proudly include it in my auction, although for full disclosure I will point out the issue so the eventual owner is not disappointed.
All in all, it was a good lesson in not getting too caught up in perfection.
Stuff I made
Wednesday, March 29, 2017
Tuesday, March 28, 2017
Finally catching up
Blossom Heart Quilt's modern HST sampler sew-along ended in December, but my last few blocks kinda fell by the wayside. Where does the time go?
Here's block 21 - Diamond Twirl.
Block 22 - Shattered. I had some fun with the prints when making this one.
Block 23 - Bejewelled. It was challenging at times, especially with the more complicated blocks, to stick to just Alison Glass' indigo handcrafted line, but I think it's going to look so striking all together.
Block 24 - Nip Tuck. Ooh this was a bit of a beast! So many teeny HST! I like the flying geese in the two prints peeking in.
And with that, all the blocks are done! I know how I want to put them together, I just need to get some sashing fabric and get to it!
Here's block 21 - Diamond Twirl.
Block 22 - Shattered. I had some fun with the prints when making this one.
Block 23 - Bejewelled. It was challenging at times, especially with the more complicated blocks, to stick to just Alison Glass' indigo handcrafted line, but I think it's going to look so striking all together.
Block 24 - Nip Tuck. Ooh this was a bit of a beast! So many teeny HST! I like the flying geese in the two prints peeking in.
And with that, all the blocks are done! I know how I want to put them together, I just need to get some sashing fabric and get to it!
Two by two
Here we go again with blocks made in sets of two! These first two raspberry kiss blocks were made for a very nice fellow Canuck who asked me if I'd be interested in a side swap since postage costs for a block swap hosted in the States kept us out. All she asked for were pink centres. As you can see, I delivered and more!
This one got an extra dose of pink in the low-volume prints.
For the March blocks in my own bee, I picked orange. How I love both of these fun Cotton + Steel prints I picked for the background. Those scary-silly tigers are too cute!
Maybe I was inspired to pick orange with the March edition of my guild's block lottery. Orange and pink is a fabulous combination! This one includes two of my favourite Carolyn Friedlander and Tula Pink prints.
Sadly I didn't win the blocks, but I'm totally happy for the person who did. She happened to be wearing orange and pink at the previous meeting when the next block and colours were announced. She was so excited!!
This one got an extra dose of pink in the low-volume prints.
For the March blocks in my own bee, I picked orange. How I love both of these fun Cotton + Steel prints I picked for the background. Those scary-silly tigers are too cute!
Maybe I was inspired to pick orange with the March edition of my guild's block lottery. Orange and pink is a fabulous combination! This one includes two of my favourite Carolyn Friedlander and Tula Pink prints.
Sadly I didn't win the blocks, but I'm totally happy for the person who did. She happened to be wearing orange and pink at the previous meeting when the next block and colours were announced. She was so excited!!
Wednesday, February 22, 2017
Two by two
It seems everything I make lately is in multiples of two. Here are my two February blocks for my bee. This month's colour is green. I love this one with the text and soft bird print.
This green block is definitely more in-your-face.
I got to chatting with a friend on Instagram when she launched a block swap for a large version of the raspberry kiss block. With so many great examples being posted on IG, I had to try one out myself. This one in all Lizzy House fabric is so subtle and pretty with the very low-volume prints.
We agreed to swap one block, but then I couldn't help and make another when I saw she was looking for this text print. I like to imagine this block captures a magical land with castles and fairytale forests.
This green block is definitely more in-your-face.
I got to chatting with a friend on Instagram when she launched a block swap for a large version of the raspberry kiss block. With so many great examples being posted on IG, I had to try one out myself. This one in all Lizzy House fabric is so subtle and pretty with the very low-volume prints.
We agreed to swap one block, but then I couldn't help and make another when I saw she was looking for this text print. I like to imagine this block captures a magical land with castles and fairytale forests.
Tuesday, February 21, 2017
Pillow-making tips
Last year I made a few pillows to auction off to support the Red Cross in its efforts to help the victims of the Fort McMurray fires. I really enjoy making pillows, people seem to really like them, and it was a chance to donate far more than I could on my own. All in all, it was a great experience! So I want to do more of that this year, only in support of local charities.
Here's the first of the four I plan on making, using a neat giant economy block pillow pattern from Clover and Violet. What a great way to showcase a big print, like this Tula bunny! Plus it was a great chance to do some of the elaborate straight-line quilting I used to do a lot more often. I soon remembered it's way more and thread consuming than a crosshatch. But I think the effect is worth it.
Here's the finished pillow sitting in my backyard where a neighbourhood bunny likes to chill under my pine tree. How perfect is that green bunny print?!
More bunnies on the back - another perfect print for this all-things-bunny pillow. Now you're wondering why I took this photo with the pillow on its side, rather than having the bunnies the right way up. Well, it is the right way because I put the back on wrong. Sigh. Why is it always the simple step that gets messed up?! As a perfectionist who is usually extra careful to the point of being a little crazy, my heart sank when I realized the mistake. And the way I put together a pillow, there is no taking it apart. I guess the plus side is that you can't look at the back and front at the same time, and at least the bunnies are all going in the same direction.
The irony is that as I was making this pillow, I thought I would use it to share a few pillow-making tips. Oh, the hubris! I guess I learned something too - always do a quick check before you start sewing on the back.
Here are a few of my pillow-making tips and techniques from making more than a few pillows (five just this month!):
Quilting:
* Generally I favour edge to edge quilting to avoid any starting and stopping. When I'm done quilting and before trimming, I stitch around the whole edge to lock the quilting in place.
Backing:
* I always make envelope backs for my pillows. Zippers look nice, but when I want to make a pillow I don't want to be delayed by making a special trip for a zipper. Plus I find it doesn't change the look of the front. Sew Mama Sew has a great tutorial including a chart with measurements for the back pieces. I printed this and have it hanging in my sewing room.
* When top-stitching the back pieces, I used my 1/4" foot and adjust the needle position to quickly zip along while getting a straight sewing line.
Assembly:
* I use Wonderclips to hold the layers together, including marking where the back pieces end on each side. I always reverse stitch in these spots to make them extra sturdy.
* Stick a pin through all the layers in the middle of the back. That way your sewing machine extension table won't slip inside the pillow cover while you're sewing.
* Sew with the flimsy side down and then there's less shifting. I also like to cut the back pieces a bit generously in case they move around. Once the layers are sewn together, simply trim off the excess.
* A 1/4" foot makes it quick and accurate to sew the layers together, and use a shorter stitch for strength.
* I always reinforce the corners. That includes back stitching at the start and end of each side, and a diagonal line across the corner. Then I trim off the excess to make the corners rounded. Here's how my corners look:
* Finally, I do a zigzag stitch around the edge to make it nice and tidy before turning it right side out.
So, now you can see, there is no way of easily taking a pillow apart when the back is sewn on the wrong direction! But, on the plus side, it's super sturdy!
Here's the first of the four I plan on making, using a neat giant economy block pillow pattern from Clover and Violet. What a great way to showcase a big print, like this Tula bunny! Plus it was a great chance to do some of the elaborate straight-line quilting I used to do a lot more often. I soon remembered it's way more and thread consuming than a crosshatch. But I think the effect is worth it.
Here's the finished pillow sitting in my backyard where a neighbourhood bunny likes to chill under my pine tree. How perfect is that green bunny print?!
More bunnies on the back - another perfect print for this all-things-bunny pillow. Now you're wondering why I took this photo with the pillow on its side, rather than having the bunnies the right way up. Well, it is the right way because I put the back on wrong. Sigh. Why is it always the simple step that gets messed up?! As a perfectionist who is usually extra careful to the point of being a little crazy, my heart sank when I realized the mistake. And the way I put together a pillow, there is no taking it apart. I guess the plus side is that you can't look at the back and front at the same time, and at least the bunnies are all going in the same direction.
The irony is that as I was making this pillow, I thought I would use it to share a few pillow-making tips. Oh, the hubris! I guess I learned something too - always do a quick check before you start sewing on the back.
Here are a few of my pillow-making tips and techniques from making more than a few pillows (five just this month!):
Quilting:
* Generally I favour edge to edge quilting to avoid any starting and stopping. When I'm done quilting and before trimming, I stitch around the whole edge to lock the quilting in place.
Backing:
* I always make envelope backs for my pillows. Zippers look nice, but when I want to make a pillow I don't want to be delayed by making a special trip for a zipper. Plus I find it doesn't change the look of the front. Sew Mama Sew has a great tutorial including a chart with measurements for the back pieces. I printed this and have it hanging in my sewing room.
* When top-stitching the back pieces, I used my 1/4" foot and adjust the needle position to quickly zip along while getting a straight sewing line.
Assembly:
* I use Wonderclips to hold the layers together, including marking where the back pieces end on each side. I always reverse stitch in these spots to make them extra sturdy.
* Stick a pin through all the layers in the middle of the back. That way your sewing machine extension table won't slip inside the pillow cover while you're sewing.
* Sew with the flimsy side down and then there's less shifting. I also like to cut the back pieces a bit generously in case they move around. Once the layers are sewn together, simply trim off the excess.
* A 1/4" foot makes it quick and accurate to sew the layers together, and use a shorter stitch for strength.
* I always reinforce the corners. That includes back stitching at the start and end of each side, and a diagonal line across the corner. Then I trim off the excess to make the corners rounded. Here's how my corners look:
* Finally, I do a zigzag stitch around the edge to make it nice and tidy before turning it right side out.
So, now you can see, there is no way of easily taking a pillow apart when the back is sewn on the wrong direction! But, on the plus side, it's super sturdy!
Pillow twins
My sewing room has been a pillow workshop of late. First I finished these two pillows using a neat free block pattern for a friend at work. She has two young daughters, so I figured it was best to make two to avoid any fighting. I love this colour combo, especially with that chartreuse in there.
Here's a close-up of the quilting with a light grey Aurifil.
And this fun Cotton + Steel print went on the back.
Then I made a matching set for an Instagram friend, who bought one of two Tula pillows I donated for an auction. She wanted both for her twin girls, but couldn't swing it during the spendy Christmas season. So I offered to make her two, which technically I already had a start on because I made a mistake and cut out extra HST fabric. One girl likes purple and the other pink, so that's what I used for the borders.
Then some matching Tula for the back. I love both these prints.
One set I'll deliver in person this week, and the other I'll pop in the mail.
Here's a close-up of the quilting with a light grey Aurifil.
And this fun Cotton + Steel print went on the back.
Then I made a matching set for an Instagram friend, who bought one of two Tula pillows I donated for an auction. She wanted both for her twin girls, but couldn't swing it during the spendy Christmas season. So I offered to make her two, which technically I already had a start on because I made a mistake and cut out extra HST fabric. One girl likes purple and the other pink, so that's what I used for the borders.
Then some matching Tula for the back. I love both these prints.
One set I'll deliver in person this week, and the other I'll pop in the mail.
Tuesday, February 7, 2017
Block lottery
My quilt guild is starting something new this month - a block lottery. Before each meeting we'll be sent a pattern and colour scheme, and then we make blocks to bring with us. For every block, you get a ballot and the winner gets to keep them all. How fun is that?
This month's is the wonky star block. I made two in Tula fabrics.
I made the pink one first and I guess my confidence faltered with the second because it's definite less wonky. My distaste for wasting fabric likely undermined my ability to go wonky.
I can't wait to see all the blocks people made, and who will be the lucky winner!
This month's is the wonky star block. I made two in Tula fabrics.
I made the pink one first and I guess my confidence faltered with the second because it's definite less wonky. My distaste for wasting fabric likely undermined my ability to go wonky.
I can't wait to see all the blocks people made, and who will be the lucky winner!
Subscribe to:
Posts (Atom)